FIND THE PRODUCT YOU NEED!
The Best Keysight-Agilent N6773A
Keysight-Agilent N6773A
Output Ratings
-Voltage: 20 V
-Current (derated 1% per degrees C above 40 degrees C): 15 A
-Power: 300 W
Programming Accuracy (at 23 degrees C +/-5 degrees C after 30 minute warm-up. Applies from min. to max. program)
-Voltage: 0.1% + 60 mV
-Current: 0.15% + 60 mA
Ripple & Noise from 20 Hz to 20 MHz
-CV peak-to-peak: 20 mV
-CV rms: 3 mV
-(PARD) CC rms: 6 mA
Load Effect (Regulation) (for any output load change, with a maximum load-lead drop of 1 V per lead)
-Voltage: 13 mV
-Current: 6 mA
Description
Agilent high performance DC power supplies offer speed and accuracy for test optimization. The single low-profile modular power system, 50-300 W, GPIB, LAN, USB, LXI Class C N6700B series provides small size up to 4 outputs in 1U of rack space; 20 DC power modules, basic, performance and precision models; as well as fast output programming with active down programming. The Agilent 300W, N6773A is a basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control.
IN STOCK
Description
Keysight-Agilent N6773A
The Agilent N6700 Low-Profile Modular Power System (MPS) is a 1U (rack unit) high, multipleoutput programmable DC power supply system that enables test system integrators to optimize performance, power and price to match test needs.
The Agilent N6700 MPS gives test system designers the flexibility to mix and match from 20 different DC power modules to create a 1- to 4-channel DC power system optimized to meet specific test requirements.
Test system engineers can invest in high-performance outputs where speed and accuracy are needed, or purchase basic performance outputs for simple DC power requirements.
Small Size The Agilent N6700 MPS uses an advanced switching power supply design that fits within
1U of rack space. It has side air vents (no top or bottom air vents) so other instruments can be mounted directly above or below it.
(Requires rack mount kit; see Ordering Information.) Built-in Measurement of Voltage and Current
The N6700 modules come standard with built-in measurement of voltage and current to simplify wiring and design of an ATE system. Protection Features Each N6700 module is protected against over-voltage, overcurrent, and over-temperature.
A fault condition in one module can be detected within 10 microseconds by other modules so that they can be quickly shut down to avoid hazardous conditions on your DUT.
Connectivity
The N6700 MPS comes standard with GPIB, USB 2.0, and 10/100 Base-T Ethernet LAN interfaces. While GPIB is best suited for use with existing systems, Agilent offers USB and LAN to allow you to take advantage of the availability, speed, and ease-of-use of common computer industry standard interfaces. The N6700 is fully compliant with the LXI Class C specification.
Security When used in systems running GPIB, the LAN and/or USB interfaces can be disabled for extra security. Also, all non-volatile RAM data and settings can be cleared from the front panel.
