FIND THE PRODUCT YOU NEED!
Keysight-Agilent N4001A
Keysight-Agilent N4001A
Agilent/HP N4001A SNS Series Noise Source 10 MHz to 18 GHz (ENR 15 dB)
The SNS series N4001A noise source is ideal for general purpose use with a low reflection coefficent and a nominal ENR of 15 dB from 10 MHz to 18 GHz. DUT’s with noise figures up to 30 dB can be measured accurately and reliably with this device. The N4001A has a selection of connectors, with an APC 3.5(m) connector as standard.
IN STOCK
Description
Keysight-Agilent N4001A
Used for low noise figure devices or devices sensitive to mismatch in the 10 MHz to 18 GHz range N4001A
Used for general purpose measurements in the 10 MHz to 18 GHz range
N4002A
Used for measurements in the 10 MHz to 26.5 GHz range The Agilent SNS Series of noise sources work in conjunction with
• NFA Series noise figure analyzers
• X-Series signal analyzers
• ESA E-Series spectrum analyzers
To simplify measurement set-up and improve accuracy these noise sources automatically download electronically stored calibration data to the compatible Agilent noise figure measuring analyzers. The noise sources also have the capability to automatically measure their own temperature so that compensation can be applied to the calibration data. These capabilities increase the overall reliability and accuracy of noise figure measurements.
SNS Series key features and benefits
• Automatic download of ENR data to the analyzer speeds overall setup time
• Electronic storage of Excess Noise Ratio (ENR) calibration data decreases the opportunity for user error.
• Temperature sensing improves measurement accuracy, leading to tighter specification of device performance.
The N4000A and N4001A, which cover the 10 MHz to 18 GHz frequency range, come with an APC 3.5 (m) connector as standard, and offer the option of a Type-N (m) connector. The N4002A, which covers the frequency range 10 MHz to 26.5 GHz, has an APC 3.5 (m) connector as standard.
