FIND THE PRODUCT YOU NEED!
The Best Keysight-Agilent N3300A
Keysight-Agilent N3300A
1800 Watt DC Electronic Load Mainframe
Agilent N3300A is a full-rack width mainframe with 6-slots that accepts combinations of N330x user-installable load modules (150 W to 600 W) for easy system configuration and future reconfiguration.
The N3300A holds up to six N3302A, N3303A, N3304A, and N3307A load modules, or up to three N3305A and N3306A load modules, allowing up to 1,800 watts of total maximum power.
A single GPIB address is all you need for complete control and read-back of all load modules within a single N3300A mainframe.
The N330xA Series of DC electronic loads provides fast operation and the accurate programming and read-back needed for high-volume DC power supply test systems.
* Input Ratings
o Operating range: 100 – 250 Vac; 48 – 63 Hz
o Input Current: 4.2 A @ 100 – 127 Vac; 2.2 A @ 200 – 250 Vac
o Input VA: 440 VA
o Inrush Current: 38 A
* Operating Temperature Range
o 0 C to 55 C
IN STOCK
Description
Keysight-Agilent N3300A
Reduced command processing time:
Commands are processed more
than 10 times faster than previous electronic loads.
Automatically execute stored
command sequences: “Lists”
of downloaded command
sequences can execute independent of the computer, greatly reducing the electronic load command processing time and computer interaction time during product testing.
Programmable delay allows for either simultaneous or sequential load changes:
This is the most efficient way to conduct testingof multiple output dc power supplies, simulating real-life loading patterns, with a minimum of programming commands.
Buffer measurement data: Voltage, current, and power measurements can be buffered for later readback to the computer, reducing computer interaction.
Control measurement speed vs. accuracy: Decrease the number of measurement samples to achieve greater measurement speed, or increase the number of samples to achieve higher
measurement accuracy.
You can optimize your measurements for each test.
Control rising and falling slew rates separately:
Reduce rate of loading change when necessary for DUT stability or to simulate real life conditions, but otherwise change load values at maximum rate.
Increase System Flexibility…for both present and future requirements Most power supply and battery charger test systems designed today need to test a variety of products and/or assemblies.
In the future, additional products or assemblies may be needed.
A flexible family of electronic loads makes present system design and future growth
much easier.
Test low voltage power supplies:
The N3300A series electronic loads operate with full stability down to zero volts. Many other electronic loads available today have been found to become unstable in the operating region below one volt. When designing power supply test platforms, the trend towards lower voltage requirements should be taken
into account.
Refer to the specification and supplemental characteristic tables for details of lower voltage operating characteristics.
Choose dc load connection method:
Automatic test systems need
consistency and reliability.
Option UJ1 8 mm screw
connectors provide a simple
screw onto which your wires,
terminated with insulated ring
terminals, may be securely
mounted.
This optional connector is specifically designed for
test systems. Wires may exit the plastic cover in any direction, and multiple wires may be
placed on each screw terminalfor easy parallel load connections.
Up to AWG 4 wire may be used.
Applications which require
repeated connections/disconections are better suited to the
standard connector. The standard connector accepts an
unterminated wire, and may be
hand-tightened.
This connector is specifically designed for bench applications and shortterm automated tests.
Design a system to test a variety of products: This series consists of
2 mainframes and 6 modules.
The N3300A mainframe is
full rack width. It has 6 slots.
The N3301A mainframe is half
rack width. It has 2 slots. Any
assortment of the 6 different
modules can be configured
into these mainframes, up to
the slot capacity. The N3302A
(150watts), N3303A (250 watts),
N3307A (250 Watts) and
N3304A (300 watts) each
