FIND THE PRODUCT YOU NEED!
Keysight-Agilent E4419B
Keysight-Agilent E4419B
Specifications describe the instrument’s
warranted performance and apply after
a 30-minute warm-up. These
specifications are valid over its
operating/environmental range
unless otherwise stated and after
performing a zero and calibration
procedure.
IN STOCK
Description
Keysight-Agilent E4419B
Specifications describe the instrument’s
warranted performance and apply after
a 30-minute warm-up. These
specifications are valid over its
operating/environmental range
unless otherwise stated and after
performing a zero and calibration
procedure.
Supplemental characteristics (shown
in italics) are intended to provide
additional information, useful in
applying the instrument by giving
typical (expected), but not warranted
performance parameters. These
characteristics are shown in italics
or labeled as “typical”, “nominal” or
“approximate”.
For information on measurement
uncertainty calculations, refer to
Application Note 64-1C, “Fundamentals
of RF and Microwave Power
Measurements”, literature number
5965-6380E. The E4419B power meter is designed for bench and automatic test equipment (ATE) use.
Features:
True dual-channel power meter – two simultaneous power readings
Fast measurement speed (up to 100 readings per second, over the GPIB, with E-series sensors)
Speed improvement of x2 using the 8480 series power sensor (compared to the 437B)
No range-switching delays with 8480 series sensors, and only one fast-range switching point with E-series sensors
Code compatibility with 438A power meter
GPIB and RS232 connector for remote control of all functions.
