FIND THE PRODUCT YOU NEED!
The Best Fluke II900
Fluke II900
Product Features:
SoundSight™ technology translates sounds into visual representation so that users can easily scan and quickly locate problem areas
Sound-based detection with ultrasonic range: Non-dependant on ambient or air/gas temperatures and useful even in loud noise conditions
Detects any type of leak, including gas, air, steam, or vacuum
Intuitive interface: Train team in matter of minutes; first-time users can find leaks within minutes
Compressed air single most expensive energy source across all factory types
According to US DOE study, compressed-air leaks account for 20% to 30% of total produced capacity in average facility
Do more with existing air compressors and delay capital expense of installing new or additional ones
Inspect 5 to 10 times faster by spotting leaks on-screen via live image
Visualization of leaks means reducing leak detection time and validating subsequent repairs in real-time
Ensure proper air pressure to your pneumatic equipment
Improve reliability in production lines
Report leaks by tagging pictures of exact locations
Make leak detection part of regular maintenance routines
Sensors
Frequency band: 2 kHz to 100 kHz
Detection range: 0.5 m to 120 m (1.6 to 393 feet), depending on ambient conditions
Field of view: 63°± 5°
Nominal frame rate: 25 FPS (number of Frames Per Second (FPS) indicates number of times image on screen is refreshed each second)
IN STOCK
Description
Fluke II900
The Fluke ii900 Industrial Acoustic Imager is designed for production facilities that rely on compressed air. With minimal training, maintenance teams can now inspect for air and vacuum leaks even during peak production periods. Equipped with an array of miniaturized microphones and the ability to easily isolate the sound frequency to identify leaks, background noise can be filtered, and leaks are easily identified. The 7-inch LCD touchscreen overlays a SoundMap™ – a visual map of noise sources using an acoustical array – on an image for quick leak location identification.
Leaks in compressed air, gas and vacuum systems hit both production uptime and the operations bottom line. Previously, the easiest way to identify leaks in a compressed air, gas or vacuum systems is to walk the plant and listen for them or conduct visible inspections with soap and water. However, only the most obvious, largest leaks make a noise detectable by the human ear while smaller leaks can go undetected. According to a study by the Compressed Air and Gas Institute (CAGI) an average compressed air system loses 30 percent of its air through leaks. If you can hear a leak, it is probably costing you thousand of dollars a year. The smaller leaks, the ones you cannot easily hear, or feel are a hidden source of wasted energy and productivity. While this is a known issue, locating air leaks has been a time-consuming and tedious, until now. With the Fluke ii900 Industrial Acoustic Imager your maintenance team can quickly pinpoint the location of compressed air and vacuum leaks, both large and small. Battery
Batteries (field-replaceable, rechargeable): 2 x Rechargeable Li-ion, Fluke BP291
Battery life: 6 hours/battery (product includes spare battery)
Battery charging time: 3 hours
Battery charging system: External dual-bay charger, EDBC 290
General Specifications
Standard palettes: Grayscale, Ironbow and Blue-Red
Operating temperature: -10 °C to 45 °C (14 °F to 113 °F)
Storage temperature: -20 °C to 70 °C ( -4 °F to 158 °F) without batteries installed
Relative humidity: 10% to 95% non-condensing
Size: (H x W x L): 186mm x 322mm x 68mm (7.3 inches x 12.7 inches x 2.7 inches)
Ingress Protection (IP): IP40 (protection against particles 1mm or greater and dripping water)
Warranty: 2 years
Self-diagnostic notification: Array-health test to identify when microphone array needs attention
Supported languages: Dutch, English, Finish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese
RoHS compliant: Yes
General safety: IEC 61010-1
Applications
Automotive:
Industrial robots
Compressed air hand tools
Vacuum lifting systems
Truck breaking systems
Manufacturing:
Compressed air hand tools
Pneumatic control valves
