FIND THE PRODUCT YOU NEED!
The Best Fluke 123
Fluke 123
Bandwidth: 20 Mhz
The Fluke 120 Series Industrial Scopemeter is a compact 20 MHz or 40MHz two channel scope and DMM. Ideal for troubleshooting industrial machinery, instrumentation, control and power systems. The Fluke 120 series has unique features like Connect-And-View, and TrendPlot that simplify taking measurements and reduce troubleshooting time when working in the field or in industrial environments.
20 MHz or 40MHz, 25 MS/s
Two Channels, Scope or DMM mode
5 mV to 500 V/div
60 s to 20 ns/div
NTSC, PAL, SECAM video triggering
True-RMS DMM with 5000 count / 0.5% accuracy
2 Channel TrendPlot for recording trends and intermittents
Optical RS-232 port for connection to PC’s
Connect-And-View allows for quick hands-off operation
IN STOCK
Description
Fluke 123
Performance characteristics
Fluke guarantees the properties expressed in numerical values with the stated tolerance.
Specified non-tolerance numerical values indicate those that could be nominally expected from the mean of a range of identical ScopeMeter test tools.
Environmental data
The environmental data mentioned in this technical data are based on the results of the manufacturer’s verification procedures.
Safety characteristics
The ScopeMeter 123 test tool has been designed and tested in accordance with ANSI/ISA S82.01-1994, EN 61010.1 (1993) (IEC 1010-1), CAN/CSA-C22.2 No.1010.1-92, UL3111-1 Safety
Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use. Use of this equipment in a manner not specified by the manufacturer may impair protection provided by the equipment.
Specifications
Dual input oscilloscope
Vertical
Frequency response
DC coupled:
Excluding probes and test leads:
DC to 20 MHz (-3 dB)
With STL120 1:1 shielded test leads:
DC to 12.5 MHz (-3 dB)
DC to 20 MHz (-6 dB)
With PM 8918 10:1 probe (optional
accessory): DC to 20 MHz (-3 dB)
AC coupled (LF roll off)
Excluding probes and test leads:
<10 Hz (-3 dB)
With STL120: <10 Hz (-3 dB)
With PM 8918: <1 Hz (-3 dB)
Rise time
Excluding probes and test leads:
<17.5 ns
Input impedance
Excluding probes and test leads:
1 MΩ//12 pF
With BB120: 1 MΩ//20 pF
With STL120: 1 MΩ//225 pF
With PM 8918: 10 MΩ//15 pF
Sensitivity: 5 mV to 500V/div
Display modes: A, -A, B, -B
Max input voltage
A, B: 600V rms up to 200 kHz,
derating to 6V rms @ 20 MHz
Max floating voltage
From any terminal to ground:
600V rms up to 400 Hz
Resolution: 8 bit
Vertical accuracy: ±(1% of reading
+ 0.05 range/div)
Max vertical move: ±4 divisions
