FIND THE PRODUCT YOU NEED!
The Best Fluke 2640A NetDAQ
Analog inputs: 20
Computed Channels: 10
Digital I/O & Alarm Outputs: 8 total
Totalizer: 1
Scan speed: Slow 6 channels/second nominal
Medium: 41 (50 Hz), 48 (60 Hz) channels/second nominal
Fast: 143 channels/second nominal
Analog to Digital Converter: Multi-slope type, linear to 18 bits
Resistance: 300 ohms to 3M 1mohms
Frequency: 15Hz to 1MHz 0.01Hz to 100Hz RTD (Pt 100) -200 to 600C 0.003C Thermocouples J, K, T 0.02C Other Thermocouple types R, S, B, C, E, N
IN STOCK
Description
Fluke 2640A NetDAQ
Hydra Series
Channel capacity
Analog inputs: 21
Digital I/0 and alarm outputs:
12 total
Totalizer: 1
Power
90 to 264 Vac, 50 or 60 Hz
(<10W), or 9 to 16 Vdc (<4W) (If both sources are applied simultaneously, the greater of ac or dc is used.) At 120 VAC the equivalent DC voltage ~14.5V.
Temperature, humidity (non-condensing)
Operating: 0°C to 28°C, ≤ 90% RH; 28°C to 40°C,≤ 75% RH; 40°C to 60°C, ≤ 50% RH Storage: -40°C to 75°C, 5% to 95% RH
Altitude
Operating: 2000 m
Storage: 12000 m. Voltage ratings
300 Vdc or Vac rms (channels
0,1,11); 150 Vdc or Vac rms (all
other inputs) IEC Overvoltage
Category II
Common mode voltage
300V dc or ac rms maximum from any analog input (channel) to earth provided that channel to channel maximum voltage ratings are observed
Standards
IEC1010, ANSI/ISA-S82.01-1994, CSA-C22.2 No. 1010.1-92, and EN61010-1:1993.
Complies with EN 50081-1, EN 50082-1, Vfg.
243/1991 and FCC-15B at the
Class B level, when shielded
cables are used.
