FIND THE PRODUCT YOU NEED!
The Best Keysight-Agilent Option-8753ES-010-1D5
Keysight-Agilent Option-8753ES-010-1D5
Base Frequency: 30 KHz Max Frequency: 3 GHz
Agilent 8753ES 30 Khz to 3 or 6 Ghz Vector Network Analyzer
The Agilent 8753ES vector network analyzer allows complete characterization of RF components.
time-domain capability option 010
High-stability frequency reference option 1D5
IN STOCK
Description
Keysight-Agilent Option-8753ES-010-1D5
Specifications describe the instrument’s warranted
performance after a half-hour warm-up and over
the temperature range of 25° ± 5° C, unless otherwise stated. Specifications for frequencies above
3 GHz do not apply to instruments with Option 075
(75-ohm impedance).
Supplemental characteristics are typical but nonwarranted performance parameters. These are
denoted as “typical,” “nominal,” or “approximate.”
The measurement uncertainty curves and measurement port characteristics given for Agilent
Technologies 8753ES systems also apply to the
8753ES with Options 006 and 011 and the 85047A
test set (50-ohm), or the 8753ES Option 011 with
an 85046B test set (75-ohm).
Dynamic Range
System dynamic range is calculated as the difference between the receiver noise floor and the
lesser of either the source maximum output or the
receiver maximum input level. System dynamic
range applies to transmission measurements only,
since reflection measurements are limited by
directivity.
Noise floor is specified as the mean of the noise
trace over frequency. Noise floor is measured with
the test ports terminated in loads, full two-port
error correction for the 8753ES and enhancedresponse error correction for the 8753ET (with
16 averages used during isolation), 10 Hz IF bandwidth (BW), maximum test port power, and no
averaging during the measurement.
